- Описание товара
- Отзывы
- Изображения товара
Описание товара
| Описание: | Supermicro H8DA8 MBD-H8DA8-B Dual Opteron 940 Serverboard |
| good | |
| 1x motherboard |
| Key Features | |
| 1. Dual AMD® Opteron™ Support, | |
| (Dual Core Ready) | |
| 1000 MHz HyperTransport Link | |
| 2. AMD® 8131 PCI-X Tunnel / | |
| AMD 8111 I/O Hub Chipset | |
| 3. Up to 16GB DDR 400 SDRAM (or) | |
| Up to 32GB DDR 333 SDRAM (or) | |
| Up to 32GB DDR 266 SDRAM | |
| 4. Dual-port Gigabit | |
| LAN/Ethernet Controller | |
| 5. 2-Channel Ultra320 SCSI with | |
| Zero Channel RAID support | |
| 6. 2x 64-bit 133/100MHz PCI-X, | |
| 2x 64-bit 66MHz PCI-X, | |
| 2x 32-bit 33MHz PCI | |
| 7. ATI RageXL 8MB Graphics | |
| 8. IPMI 2.0 Support | |
| 9. 8 Fan Support with Speed Control | |
| Product SKUs | |
| MBD-H8DA8-B | H8DA8 (Bulk Pack) |
| Revision | 1.11 |
| Physical Stats | |
| Form Factor | Extended ATX |
| Dimensions | 12" x 13.05" (30.5cm x 33.2cm) |
| Processor/Chipset | |
| CPU | Dual 940-pin ZIF Sockets |
| Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s) | |
| VRM x3 | |
| Chipset | AMD 8131 HyperTransport PCI-X Tunnel |
| AMD 8111 HyperTransport I/O Hub | |
| System Память | |
| Память Capacity | Eight 184-pin DIMM sockets support: |
| Up to 16 GB DDR 400 MHz memory OR | |
| Up to 16 GB DDR 333 MHz memory OR | |
| Up to 32 GB DDR 266 MHz memory | |
| Single or Dual (recommended) channel memory support | |
| For Single CPU: Память must be populated in CPU1 DIMMs only | |
| For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks | |
| Память Type | DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1GB, 2GB, 4GB** |
| Память Voltage | 2.5 V only |
| Error Detection | Corrects single-bit errors |
| Detects double-bit errors (using ECC memory) | |
| On-Board Devices | |
| SCSI | Adaptec AIC-7902W Controller |
| Dual-Channel Ultra320 SCSI with Host RAID (Host RAID only supports 4 drives) | |
| Host RAID 0, 1, 10, JBOD | |
| Zero Channel RAID | Support for Zero-Channel RAID with Adaptec 2010S SCSI ZCR Card |
| (Card not included) | |
| IPMI | 1U and 3U support for Intelligent Platform Management Interface v.2.0 (Optional: 1UIPMI-B) |
| 2U and 4U support for Intelligent Platform Management Interface v.2.0, Low Profile (Optional: AOC-LPIPMI-LANG) | |
| RMM (Remote Management Module) | |
| (Card not included) | |
| Network Controllers | Broadcom® 5704 Dual Port (DP) Gigabit Ethernet Controller |
| Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | |
| VGA | ATI Rage XL 8MB PCI Graphics Controller |
| Expansion Слоты | |
| PCI-X | 2 64-bit 133/100MHz PCI-X (3.3V) slots |
| 2 64-bit 66MHz PCI-X (3.3V) slots | |
| PCI | 2 32-bit 33MHz PCI (5V) slots |
| IPMI | IPMI 2.0 expansion slot |
| Chassis ( Optimized for H8DA8 ) | |
| 2U Chassis | SC823S-550LP * |
| SC823S-R500LP * | |
| * Please use air-shroud CSE-PT0083 | |
| (Air-shrouds sold separately) | |
| 3U Chassis | SC833S-R760 |
| SC833S-550 | |
| SC933S1-R760 | |
| SC933S2-R760 | |
| Rackmount Tower / 4U | SC743S1-R760 |
| SC743S1-650 | |
| Important Chassis Notes | To ensure system stability, a 420W (minimum) ATX power supply |
| [ 8-pin (+12V) and 24-pin are required] | |
| System BIOS | |
| BIOS Type | 4Mb Flash EEPROM with AMI® BIOS |
| BIOS Features | Plug and Play (PnP) |
| SMBIOS 2.3 | |
| DMI 2.3 | |
| ACPI 2.0 | |
| Fan Speed Control | |
| Input / Output | |
| IDE | Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices |
| Floppy | 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support |
| LAN | 2 RJ45 LAN ports |
| USB | FUCI |
| Up to 5 USB Ports 1.1 Compliant | |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | 2 Fast UART 16550 serial ports |
| Management | |
| Software | Optional IPMI (Intelligent Platform Management Interface) 2.0 |
| Super | |
| Doctor III | |
| Watch Dog | |
| Power Configurations | ACPI/API Power Management |
| Wake-On-LAN (WOL) header | |
| Power-on mode control for AC power loss recovery | |
| Internal/External modem remote ring-on | |
| PC Health Monitoring | |
| CPU | Monitors CPU Core Voltages, +3.3V, +5V, ±12V & +3.3V Standby, +5V Standby, HyperTransport voltage 1.2V, memory voltage 2.5V, DDR termination 1.25V, chipset voltage 1.8V |
| Up to 8 fan status | |
| Supports System Management Utility | |
| FAN | Total up to 8-fan status |
| 3-pin fan speed control or | |
| 4-pin Pulse Width Modulated (PWM) fan connector | |
| Temperature | Monitoring for CPU and chassis environment |
| LED | Overheat LED |
| Other Features | Chassis Intrusion Header |
Отзывы:
Ваш отзыв может быть первым.
Изображения
нет изображений
